Landspeeder Luke

Geonosis Arena Pillars and Balcony

I've released this pillar file previously, but now there's an updated broken version as well as this balcony that can fit 3-4 figures. All prints without supports!

I printed these all in brown, then used a sponge and rough paint brush to do red, then orange, then dark brown, then a beige/or...

Station Stackers - Prison Cell and Laser Bridge

Two more additions for your Station Stackers diorama.

The torture droid arm should fit in the groove between the upper and lower halves of the droid.

Use any matte black filament, I really like this red for the floor...

Station Stackers

I'm so excited to kick off this new series of stackable Death Star inspired dioramas! Currently the gray and white wall sections are available to download/print, shown here using pre-cut black acrylic for the floors.

In the coming weeks and months this project will continue to grow as I col...

Coming soon...

Ash Gray
Black Acrylic

Optimized for 2025-01-14 18:25:18 +0000 UTC View Post

Darth Sidious

This was a figure that felt missing from my Phantom Menace shelf, it's Darth Sidious, available as a 6" scale statue. Super easy to paint since you can't really see his eyes! I recommend hollowing him out (put holes on the bottom and back) and rotating him as seen in the photo so the supports don...

Safety Droid

This is a fairly easy make! Just pop apart your HK Security Droid and spray it white (mid torso with black or black metallic). This head sits right onto the neck peg (use a little tacky or hot glue so there's some movement). Enjoy! 2024-12-26 21:08:22 +0000 UTC View Post

Hoth Turret

Merry Christmas! Here is an easy print for you to tackle today! Designed for support-free printing as per usual!

Hex Terrain

Here is a simple piece that covers 3 hex tiles to create either a flat surface for larger figures like the Droideka, or you can use the terrain piece to create a small rocky diorama. Try printing in rock filament for a Tattooine...

Ol' Ben!

With the new Sebulba Black Series figure, I knew Ben Quadinaros needed to be in the pipeline! TheGlowingGhost knocked it out of the park as per usual.

Duel of the Fates Catwalks

Here is an AMS friendly (but not required) diorama that's a ton of fun!

The center tube was done using 2 acrylic tubes (3" inner and 6" outer both 12" tall). I bought mine on Amazon for faster shipping speed (overpriced) but I saw plenty of other places online to purchase. I used an airbrus...

The Queen's Throne

Inspired by the Naboo palace, a simple print for you all to flesh out that Phantom Menace shelf.

I would recommend doing the columns with a base coat of dark maroon with some sponged on white/gray paint for a marble effect (these were 'painted' digitally) so don't use these as reference. Y...

Bespin Duel

Inspired by one of the most iconic scenes in all of cinema, I'm excited to present this fully rebuilt Bespin Duel diorama. The railings especially have been revisited so they should print cleanly and sturdily.

I recommend printing the "floating" silos on the right half with a lighter infill...

The General

Happy to bring this head sculpt and accessories to 1/12 scale. Body is General Lando with skirt from Death Squad Commander (on backwards). Prototype painted by FredrixFigures

TVC Cardback Keepers

This will be updated over time to include a wider range of The Vintage Collection's bubble sizes, please let me know in the comments below which figures you'd like to see this updated for! Bonus points if you can help me with bubble measurements.

3MF file included for Bambu AMS print...

Cantina Alcoves

Extending the previously released cantina bar, I'm happy to reveal this extension which of course can be mirrored on the opposite side as well!

I do plan on doing the entrance as well which will extend t...

Wuher the Bartender

He's finally here! With a beautiful head sculpt by BlueD, a perfect body by GlowingGhost, plus an amazing paint job on the prototy...

Catwalk and Cargo Sled

This is a big one! The catwalk floor is 24" wide!

Support free printing, with 3MF AMS files (for multi color printing) for the floors, poles and cargo sled.

Rubber wires here: https://amzn.to/46MCNIs

Checking in!

Hey everyone! Hope the cantinas and cockpits have kept everyone’s printers busy. The last couple weeks I have been test printing a lot and trying to educate myself on the strengths and limitations of features like AMS and print ironing, which will change how I design upcoming projects like Deat...

The Cantina

Completely newly sculpted from the ground up, this 1/12 scale Cantina measures 17” wide by 9” tall. I plan to build out additional parts to the cantina soon.

I recommend printing the back archway with 15% infill, and printing the silver awning at 10% to keep it lighter.

The chairs...

Magsafe Hex Stand

Just a quick little design I made last night for my desk! Works with the existing hex stands so you can easily mix and match your desk figgies.

Acolyte Noodle Shop

This was printed with wood filament which actually is pretty cool!

You can print the top platform and window without needing to raise it up with the bottom walls

Bazil - The Acolyte

@TheGlowingGhost saves the day again with this amazing sculpt of Bazil that I commissioned for you all! Two head sculpts and 5POA style arms as options, or print the body all in one piece like I did. Enjoy!

Website Update

https://www.landspeederluke.com

Hey everyone! I've updated the link above to include the last few months of files. It's a great way to see everything in one place instead of scrolling through Patreon. Each image links d...

The Cockpit

It's finally here! I have never worked harder on a project and this still took way more work than I expected. It's a bit more advanced to print than a lot of my other files, but overall I tried to make it as easy as possible to print and paint. Turn off supports except when instructed.

Each...

Magistrate Bust Statue

Straight from Magistrate Greef Kargas' office is this bust beautifully sculpted by BlueD. I wanted to give R4 a buddy since there wasn't much shelf context to this 2024-06-11 13:00:11 +0000 UTC View Post

Bambu Sale

I’ve been wanting to make a post like this for a while, and the current sale is amazing. I can’t overstate how much I love my Bambu P1P. I’ve been running three of these since September of last year and have not had a s...

Dedra Meero

Prototype painted by @Fett.Clone, Tala body repainted by @FredrixFigures

Theed Streets

This comes with multiple options for planters so you can mix and match to extend it.

Here is the foliage I used, I just used my zap-a-gap to glue it all on, but there are probably better glues for this kind of stuff. Also most of the flowers are just sitting on top of the planters without g...

Ugnaughts!

Another collaboration with The Glowing Ghost finally brings the Bespin Ugnaughts to 1/12 scale. A wide selection of parts allows for some variety on your shelf with tons of possible combinations. These are 3.75" ta...

Imperial Outpost

Inspired by the Stormtrooper camps in the current season of Fortnite, excited to present this Imperial Outpost. Enjoy!